Vlan Concepts

A VLAN (Virtual LAN) is an attribute that can be applied to network packets. Network packets can be "tagged" into a numbered VLAN. A VLAN is a security feature used to completely isolate network traffic at the switch level. VLANs are completely separate and mutually exclusive. T he Red Hat Enterprise
Virtualization Manager is VLAN aware and able to tag and redirect VLAN traffic, however VLAN implementation requires a switch that supports VLANs.
At the switch level, ports are assigned a VLAN designation.

A switch applies a VLAN tag to traffic originating from a particular port, marking the traffic as part of a VLAN, and ensures that responses carry
the same VLAN tag. A VLAN can extend across multiple switches. VLAN tagged network traffic on a switch is completely undetectable except by machines connected to a port designated with the correct VLAN. A given port can be tagged into multiple VLANs, which allows traffic from multiple VLANs to be sent
to a single port, to be deciphered using software on the machine that receives the traffic.

Comments

Post a Comment

Popular posts from this blog

Using a Linux server to route packets between two private networks

Image
Reference: http://www.tecmint.com/setup-linux-as-router/ We want to route icmp (ping) packets from dev2 to dev4 and the other way around as well (note that both client machines are on different networks). The name of each NIC, along with its corresponding IPv4 address, is given inside square brackets. Our test environment is as follows: Client 1 : CentOS 7 [enp0s3: 192.168.0.17/24] - dev1 Router : Debian Wheezy 7.7 [eth0: 192.168.0.15/24, eth1: 10.0.0.15/24] - dev2 Client 2 : openSUSE 13.2 [enp0s3: 10.0.0.18/24] - dev4 Let’s view the routing table in dev1 (CentOS box): # ip route show and then modify it in order to use its enp0s3 NIC and the connection to 192.168.0.15 to access hosts in the 10.0.0.0/24 network: # ip route add 10.0.0.0/24 via 192.168.0.15 dev enp0s3 Which essentially reads, “Add a route to the 10.0.0.0/24 network through the enp0s3 network interface using 192.168.0.15 as gateway”. Route Network in Linux Likewise in dev4 (openSUSE box) to ping h
Read more

PHP Fatal error: Class 'JFactory' not found

I have faced this issue in Joomla site and searched the forums but none of the forums including joomla did not give solution for me. They simply suggest to check joomla version, php version compatibility and php extensions. Finally I have fixed the issue. Issue:- ---------  [26-Sep-2014 18:11:29 Europe/Berlin] PHP Fatal error: Class 'JFactory' not found in /home/test/public_html/index.php on line 31 Cause & Solution:- ----------------------- In my case, it seems file which gives the class JFactory was missed. /home/test/public_html/libraries/joomla/factory.php --->Core file for Joomla. Simply restore that file under proper path to fix the issue.
Read more

KVM & Qemu

QEMU is a powerful emulator, which means that it can emulate a variety of processor types. Xen uses QEMU for HVM guests, more specifically for the HVM guest's device model. The Xen-specific QEMU is called qemu-dm (short for QEMU device model) QEMU uses emulation; KVM uses processor extensions (intel-VT) for virtualization. Both Xen and KVM merge their various functionality to upstream QEMU, that way upstream QEMU can be used directly to accomplish Xen device model emulation, etc. Xen is unique in that it has paravirtualized guests that don't require hardware virtualization. Both Xen and KVM have paravirtualized device drivers that can run on top of the HVM guests. The QEMU hypervisor is very similar to the KVM hypervisor. Both are controlled through libvirt, both support the same feature set, and all virtual machine images that are compatible with KVM are also compatible with QEMU. The main difference is that QEMU does not support native virtualization. Consequently, QEMU has
Read more